The N5XO & KE5MHJ Station Renovation
04/06/21 06:00
N5XO Station Build:
What started out as a simple tower modification project idea back in April of 2020, and because of COVID, getting all of the parts ordered and shipped to me dragged out for months. The RAZER took about 5 months, due to the owner/operator of the company and his wife both developing COVID and unable to work for awhile, then follow that up with all the orders that came in before and after me……So I did not get the RAZER unit until the first week of January.
That combined with a GEMI amp for my 1296 station, I ordered it also in April, and two weeks later I learned due to supply problems, etc with COVID AND BREXIT, it would not ship until January 6th. My original thought was to cancel the order and just order it again after they started shipping.
After reviewing it with Ruth, we just decided to leave the order placed and the charge to my bank card completed…….As I did not want something to happen and I not have the money when they were ready to ship.
I am glad that I did, it arrived the first week of January a little ahead of schedule, and orders at that time were now pushed out past July….so basically had I canceled my order and waited it would never be here.
Combine that with delays in some very low loss coax for the tower rotor jumpers, relay boxes and my mast mounted pre-amp for 432 and even though every order was placed last year before late May, the last of the parts all arrived in January.
To top off the frustration of all of the above, due to some other life events, I learned that I would also be MOVING MY HAM SHACK from the front bedroom and family room….to a back bedroom of the house. NOW I’LL BE HONEST, THIS SUCKS…..There are 14 hard line cables running from 4 towers through the attic and down into my ham shack……These hard line cables range from 1/2 inch to 2 1/4 inch. I will tell now it took Ruth and me 2 full days and a lot of struggling to move them from the den into the front bedroom when I moved the shack so that I could turn the den into a home theater room {which I am also giving up for this current situation {REALLY BIG SIGH}. PULLING EVERY SINGLE CABLE OUT OF THE HOUSE BACK TO EACH TOWER IS GOING TO BE HELL.
Then of course the projects got held up on the tower…..due to the fact that we had a major deep freeze that kind of killed all activity, power and desire to go out the front door for a couple of weeks, combined with repairing damage at the ranch and here from the deep freeze…….We then finally started planning the tower project first phase.
THEN CAME THE RAINS :) Now while I was disappointed to get rained out not once, but twice on planned tower weekends, I was grateful for the much needed rain here and at our ranch. The ranch is coming out of the drought stage, and we are now just DRY rather than sever. But I will be honest, when last Saturday the rains came down like cats and dogs from 10:pm the night before until 9:am Saturday….I WAS TRULY BUMMED.
But as luck had it….the rain stopped at 8:30 and by 9:30 it was drying up and by 10:am when we were ready to get started….it was not bad and was actually a bit cooler than expected.
SO PHASE ONE WAS FINALLY ABLE TO BE STARTED.
=====================================================================
I’ve broken the shack remodel into 4 Phases.
PHASE #1: Strip the primary tower of all antennas, mast, thrust bearing, cables, relays, and pre-amps. Leaving the tower 100% bare.
COMPLETED!
PHASE #2: Pull 100% of all the control cables, rotor cables, hard line, etc 100% out of the house, and off all towers.
Phase #3: Complete the RAZER installation, and install new antennas for 2 meters vertical FM, 2 Meters Horizontal CW/SSB. Plus 900 MHz FM Vertical.
Phase #4: Move the HAM shack and return it to a multi-operator contesting shack to allow up to 3 operators to take part in the VHF/UHF contest.
We are as part of Phase #4 adding 10 Giga-hertz capability to our shack.
Shack will be setup for single operator on 6 meters, single operator on 144, 220 and a single operator on 900, 1296, and 10 Gig.
I will also fully restore our full HF operational capability from 160 meters through 10, but all as a single operator as I have NO INTEREST in HF contesting.
WELL THAT IS THE NEW PROJECT, I am fixing to take two weeks vacation and devote all of my time to getting this time in a quick and timely manner.
What started out as a simple tower modification project idea back in April of 2020, and because of COVID, getting all of the parts ordered and shipped to me dragged out for months. The RAZER took about 5 months, due to the owner/operator of the company and his wife both developing COVID and unable to work for awhile, then follow that up with all the orders that came in before and after me……So I did not get the RAZER unit until the first week of January.
That combined with a GEMI amp for my 1296 station, I ordered it also in April, and two weeks later I learned due to supply problems, etc with COVID AND BREXIT, it would not ship until January 6th. My original thought was to cancel the order and just order it again after they started shipping.
After reviewing it with Ruth, we just decided to leave the order placed and the charge to my bank card completed…….As I did not want something to happen and I not have the money when they were ready to ship.
I am glad that I did, it arrived the first week of January a little ahead of schedule, and orders at that time were now pushed out past July….so basically had I canceled my order and waited it would never be here.
Combine that with delays in some very low loss coax for the tower rotor jumpers, relay boxes and my mast mounted pre-amp for 432 and even though every order was placed last year before late May, the last of the parts all arrived in January.
To top off the frustration of all of the above, due to some other life events, I learned that I would also be MOVING MY HAM SHACK from the front bedroom and family room….to a back bedroom of the house. NOW I’LL BE HONEST, THIS SUCKS…..There are 14 hard line cables running from 4 towers through the attic and down into my ham shack……These hard line cables range from 1/2 inch to 2 1/4 inch. I will tell now it took Ruth and me 2 full days and a lot of struggling to move them from the den into the front bedroom when I moved the shack so that I could turn the den into a home theater room {which I am also giving up for this current situation {REALLY BIG SIGH}. PULLING EVERY SINGLE CABLE OUT OF THE HOUSE BACK TO EACH TOWER IS GOING TO BE HELL.
Then of course the projects got held up on the tower…..due to the fact that we had a major deep freeze that kind of killed all activity, power and desire to go out the front door for a couple of weeks, combined with repairing damage at the ranch and here from the deep freeze…….We then finally started planning the tower project first phase.
THEN CAME THE RAINS :) Now while I was disappointed to get rained out not once, but twice on planned tower weekends, I was grateful for the much needed rain here and at our ranch. The ranch is coming out of the drought stage, and we are now just DRY rather than sever. But I will be honest, when last Saturday the rains came down like cats and dogs from 10:pm the night before until 9:am Saturday….I WAS TRULY BUMMED.
But as luck had it….the rain stopped at 8:30 and by 9:30 it was drying up and by 10:am when we were ready to get started….it was not bad and was actually a bit cooler than expected.
SO PHASE ONE WAS FINALLY ABLE TO BE STARTED.
=====================================================================
I’ve broken the shack remodel into 4 Phases.
PHASE #1: Strip the primary tower of all antennas, mast, thrust bearing, cables, relays, and pre-amps. Leaving the tower 100% bare.
COMPLETED!
PHASE #2: Pull 100% of all the control cables, rotor cables, hard line, etc 100% out of the house, and off all towers.
Phase #3: Complete the RAZER installation, and install new antennas for 2 meters vertical FM, 2 Meters Horizontal CW/SSB. Plus 900 MHz FM Vertical.
Phase #4: Move the HAM shack and return it to a multi-operator contesting shack to allow up to 3 operators to take part in the VHF/UHF contest.
We are as part of Phase #4 adding 10 Giga-hertz capability to our shack.
Shack will be setup for single operator on 6 meters, single operator on 144, 220 and a single operator on 900, 1296, and 10 Gig.
I will also fully restore our full HF operational capability from 160 meters through 10, but all as a single operator as I have NO INTEREST in HF contesting.
WELL THAT IS THE NEW PROJECT, I am fixing to take two weeks vacation and devote all of my time to getting this time in a quick and timely manner.
Archives
May 2022
July 2021
June 2021
March 2021
February 2021
January 2021
December 2020
September 2020
August 2020
April 2022
March 2022
February 2022
January 2022
December 2021
November 2021
October 2021
September 2021
August 2021July 2021
June 2021
May 2021
April 2021March 2021
February 2021
January 2021
December 2020
November 2020
October 2020September 2020
August 2020